Cleaning of fiber cables is essentially important in order to remove the contaminations like oil and dust particle. If not done so, it can decrease the performance of network area.
Series of tools that are required to carry this process includes alcohol, dusters, swabs and wipes. Toughest contaminations can be removed easily via the help of these tools. Furthermore, this document would provide you information regarding inspection and cleaning procedure of fiber optic cables.
Let’s first have a look at the steps of general cleaning process:
Inspect the cables: In order to start off with the procedure, inspection is foremost thing to do. Therefore, cables, connector, component or bulkhead are inspected properly with the help of fiber microscope. With the use of microscope, technician would be able to clearly identify the accumulated dust particles on various parts of the fiber.
Initial cleaning process with dry technique: After inspecting the dust, first cleaning process starts which comprise of dry technique. In this process, dry cleaning equipments are used like swabs, air containers, and air sprays etc.
Second time inspection: After the completion of the first scrubbing process, technician needs to again check the fiber. If contamination is still present, he needs to further perform second scrubbing process technique.
Scrubbing process with wet cleaning technique: The fiber and connectors which are still dirty and are not cleaned via dry process, they are needed to go under wet scrubbing technique. In this method, wet cleaning equipments would be used which comprise of alcohol, lint fibers and wipes etc.
Inspection of connector again: Once the wet procedure is also completed, the connector and fiber inspection process would again be carried in order to check, if there is any dust left. If yes, then again follow the process of cleaning fiber optic, until its end-face is not cleaned. In case, if it is left undone, it would cause problem and the loss would eventually become bigger & signal would become worse.
Having discussed the above steps of fiber optic cleaning procedure, it’s quite clear that to make the fiber contamination free, it’s vital to follow all these steps in systematically form. Furthermore, both the dry and wet technique is must, so as to make the fiber cables and network contamination free.
In regard to this, a technician must make sure that he is carrying reliable source of equipment with him. This is because good equipment contributes in optimal cleaning process and provides satisfactory results. For this one must contact reliable suppliers who are trustworthy to give guaranteed equipment to their clients.
In order to alter fiber link failure due to contamination of dust and oil; make use of reliable cleaning fiber optic equipment.
No comments:
Post a Comment